The EZ Plug is an easy to apply surface mounted leash plug. Perfect for flat surfaces. Application is quick and easy using a 3M very high bond peel and stick adhesive. No cutting into the board or resin mix required. You can now locate your leash plug where you want it.
The single kit includes one (1) EZ plug.
Available in white, and clear
Application Instructions are as follows:
- Select a location for the E-Z Plug that is flat. Clean area of wax, sand, dust, etc… Use acetone or rubbing alcohol if necessary.
- Tear open primer pouch, exposing the towelette. Keep towelette in pouch and wipe primer onto the entire area that will be covered by the E-Z Plug, and allow to dry 1-2 minutes.
- Position E-Z Plug. Peel off liner and firmly press plug onto board. Make sure adhesive is flush with deck. Proper curing of adhesive is 72 hours for maximum strength.
THAT’S IT! Add water and enjoy your board with the safety of a leash. 😉